Introduction:
Technology has evolved drastically during the last decade. The transportation industry is one of the many industries that have also been widely influenced by this technological revolution.
Due to emission caused by vehicles. Motor brands have focused on manufacturing continent, economical, and, eco-friendly vehicles. E-Bike is one of them.
E-Bikes as the name suggest are electric bikes. They don’t have any engine that needs petrol, oil, and cause environmental damage. It works on electricity and is power by a motor. The motor gets its power from the battery that is fitted in these bikes.
What to check when buying an e-bike?
There’s not a lot of things that you may be concerned about before buying an e-bike. As it only has a motor that allows it to run. Therefore, the two most important things to check are the motor and battery condition.
Both of these factors play a big role in the ride and mileage of the bike. Therefore, it is important to thoroughly check the batteries’ health before making the final buying decision.
How to test the battery of e-bike?
The battery that is used in an e-bike is most commonly a lithium-ion battery. The lithium-ion battery is a great choice for electric vehicles as they are light and easily rechargeable.
However, it is very important to test the battery of the e-bike to have an insight into its performance. The batteries can be tested by measuring the voltage, current, and resistance of the battery.
For testing the battery of your e-bike you will require a multimeter or an e-bike battery monitor. A multimeter is used to measure current and voltage which can also be used to test the battery of an e-bike. However, the e-bike battery monitor is made for the purpose and is a great device to test the battery of the e-bike.
Let’s start with the guide on how you can test the batteries with the use of a multimeter and e-bike battery monitor.
Testing the Batteries using a Multimeter
Before, we start the main question is why is it important to test the battery of your e-bike. The answer to this is, the battery health of an e-bike tells you about the performance and the life that is left on the battery. This gives you an insight before making your buying decision.
To begin the test of the battery, make sure that the battery is fully charged and if possible, separate it from the chassis of the bike.
Now connect the multimeter to the terminal of the battery and start the test. You can run the diagnosis and test the load of the battery which will give you the reading for analysis.
Firstly check the voltage using the multimeter. Once you get the reading, match the reading with the specification of the bike. This reading will tell you about the health of the battery.
Next up test the current which will tell you about the capacity that the battery possesses. And finally, check the resistance. The resistance tells the flow of the current of the battery. The higher the reading the weaker the flow.
Testing the Batteries using a E-bike Battery Monitor
Most of the new e-bikes come pre-installed with a battery monitor system. This system gives you all the essential information such as; battery health, average, capacity, and many more.
The most advanced Battery Monitor system can also generate a report of the analysis and also give you a prediction to change or service the battery.
However, if your bike doesn’t have a battery monitor. You can install a third-party product to test your battery.
E-Bike Battery Monitor similar to multimeter test the voltage and current of the battery through which you can analyze the performance and health of the battery.
The analysis criteria are the same as the multimeter. However, a modernized battery monitor can also give you remarks such as good, average, or bad which makes it easier to monitor the performance of your battery.
Conclusion
In the end, we can conclude, an e-bike is the future of the vehicle. Due to emissions which is harmful to the environment, motor brands are focusing on developing electric vehicle and e-bike is one of them.
An e-bike’s most important part is its battery. It is important to maintain and properly monitor its performance. For the testing of your battery, you can either use a multimeter or an e-bike battery monitoring system.
Both of them are very helpful. However, the e-bike battery monitoring system allows hassle-free monitoring and allows you with remarks and reports. While for multimeter you have to record and check the specification. But the readings from the multimeter are more accurate and precise.
We hope that you find this article helpful in testing your battery and analyzing the performance and life of your e-bike.
